Parking garages and trafficked surfaces with high mechanical stresses

1 Substrate

2 Primer
KÖSTER 121
4 Top Coat
KÖSTER CT 221

Parking garages and trafficked areas have especially high requirements on coatings. The KÖSTER OS 8 System is a highly resistant, easy to apply solution.

Surface preparation is critical and should result in a clean, dry surface free of all bond-inhibiting materials. KÖSTER CT 121 mixed with KÖSTER Quartz Sand MA 30 (1:1) is used as a primer and applied with a standard trowel. Immediately afterwards, the primed surface is spread with a roller and subsequently broadcasted with KÖSTER CT Quartz Sand MA 20. Through the broadcast with KÖSTER Quartz Sand a very high mechanical resistance is attained as well as a high slip resistance.

After excess Quartz Sand has been removed, the top coat consisting of the solvent-free KÖSTER CT
221 is applied. The KÖSTER OS 8 system has been tested according to the DIN EN 1504-2 guideline and fulfills the supplementary standard DIN V 18026.

Always adhere to the specifications in the respective Technical Guidelines.

 

Back

Top
Albania Austria Bosnia and Herzegovina Brasil Bulgaria China Croatia Czech Republic Denmark Finland Germany Ghana Greece Hungary Italy Japan Kazakhstan Kuwait Latvia Lebanon Macedonia Mexico Netherlands New Zealand Norway Panama Poland Portugal Romania Russia Senegal Serbia Slovakia Slovenia South Africa Spain Thailand Turkey Ukraine United Kingdom United States of America